Netgear DG834 SNMP Guide

Download Guide as PDF

The following details the steps you need to make your router ready for use with the Cerberus NetSTATS broadband monitoring service.

It is recommended that you connect your computer directly to the device to make the configuration changes. This may require you to change the IP address of your computer to be able to contact the router on its management IP. Please review configuration support documentation for your own operating system on how to do this.

Once connected to the router follow the steps below.

1. Access the router web interface visiting the following URL http://192.168.0.1/snmp.htm in your web browser.

2. Tick the box Turn SNMP On to enable this feature. Enter the SNMP Read Community String in the field labelled Read Community Name.
   
   

   Open

   

3. Once you have entered the details click on the apply button.

4. Configuration is now complete. You can now close your web browser.