Configuring Cisco ATA with MyCloud Voice

Configuring Cisco ATA with MyCloud Voice.

  • Connect Cisco ATA ethernet port with switch or machine directly from where you can manage Cisco ATA. Default IP address for ATA is 192.168.15.1

  • Connect Cisco ATA internet port with switch or router from where Cisco ATA can access the internet. It will get IP via DHCP.

  • Configure machine to use 192.168.15.X IP and access Cisco ATA at http://192.168.15.1. You need to login using default username and password as admin // admin.

  • Navigate to Voice, and expand Line 1.

  • Configure following settings and click submit.

  1.  

    1. Proxy - mycloudvoice01.ecloudserv.net:5060

    2. Display Name – Display Name

    3. User ID – Extension number

    4. Password – Secret received from your MyCloud Voice order.

    5. Auth ID – Extension number.

  • The phone will redirect or else you can click on hyperlink to get back to status.

  • Click on information tab and you will see line 1 status as registered, you can plug the phone to line 1 and start using it.